x-fabric home

E-model calculator

The E-model estimates from delay, echo, packet loss, codec and noise how good a call will be before it is made. The calculator follows the current editions of the ITU-T recommendations.

Calculator

Bandwidth
All parameters
R-factor– Estimated MOS ()– Basic signal-to-noise ratio RoSimultaneous impairments IsDelay and echo IdCodec and packet loss Ie,effAdvantage factor A

How the E-model works

The E-model is a planning tool. From the best possible value it subtracts the impairments, which add up on the scale of the R-factor: noise and loudness (Ro, Is), delay and echo (Id), codec and packet loss (Ie,eff). An advantage factor A can offset what users accept in return for special access.

The R-factor goes up to 100 in narrowband, 129 in wideband and 148 in fullband. An unimpaired narrowband connection with G.711 reaches 93.2. The R-factor converts into an estimated MOS for the conversational situation (MOS-CQE) on the five-point scale.

The E-model predicts; it does not measure. How calls in your network actually sound is shown by a measurement with a reference signal.

Speech quality, explained

Origin

The ITU-T's E-model calculator comes from us: x-fabric developed it and handed it over to ITU-T in 2007. This calculator follows the current editions, ITU-T G.107 (06/2015), G.107.1 (06/2019) with Corrigendum 1 (01/2020) and G.107.2 (03/2023), with the codec values of ITU-T G.113 (09/2024).

The calculation runs in your browser. Nothing you enter is sent anywhere.